Automatic Solidifying Point & Pour Point Tester EZL-SPPT100 Catalog

Automatic Solidifying Point & Pour Point Tester EZL-SPPT100

Description

Automatic Solidifying Pour and Point Tester EZL-SPPT100 is applicable to oils with solidifying points ranging from -60°C to 10°C. It can monitor and show real-time temperature data while effectively simulating testing status. The test methods are entirely automated beginning with sample injection, ensuring exceptional stability and accuracy. The results are reliable and printable. Our tester utilizes high-accuracy detection sensors and semiconductor refrigeration technology.

Specifications

Solidifying Point	-60℃ to 10℃
Precision	±1℃
Ambient Temperature	25±10℃, RH < 85%
Display Resolution	0.1℃
Maximum Cooling Depth	Temperature difference ≥ 65℃
Cooling Speed	15min temperature difference ≥ 60℃
Requirement For Cooling Water Pressure	4.9 × 10 to 49 × 105Pa
Flow Rate	1.5L/min
Sample Dose	20ml per time
Standards	GB/T 510, ASTM D852, GB/T3535, ASTM D97
Maximum Power Consumption	250W
Power Supply	AC220V±22V，50Hz
Dimension	460mm × 360 mm × 470mm
Net Weight	26Kg

Features

✓ Highly automated with advanced design
✓ A micro-printer is installed
✓ The test accuracy is excellent and rapid
✓ It uses SCM as the primary control system
✓ This requires a minimal sample for testing
✓ A colored touch screen

Standard Accessories

✓ Printer Paper × 2<hr> Fuse (Φ5 × 20,10A) × 2<hr> Power Line (250V / 6A) × 1<hr> Circulatory Water Pipe and Drain Line × 5

Optional Accessories

✓ Low temperature circulatory water bath

Applications

✓ It has a wide range of applications in oil refineries, oil stations, and other related institutions. It's used to find the solidifying and pour points of light oils with good flow and low viscosity, like gasoline, light diesel, and transformer oil.