Gas Chromatography Mass Spectrometry EZL-GCMS100 operates optimally at a flow rate of 1 to 1.5 ml/min, ensuring efficient compound separation. It is equipped with a pre-filter that enhances selectivity by removing unwanted ions before mass analysis. This system enables simultaneous analysis of different components, enhancing productivity and efficiency. Our EZL-GCMS100 detects VOCs, solvents, and impurities in samples like plastics and semiconductors, supporting advanced material testing.
| Gas Chromatography Flow Rate | 1 to 1.5 ml/min |
|---|---|
| Maximum Flow Rate | 10 ml/min |
| Inlet Temperature | 450 °C |
| Pressure Range | 0 to 100 psi |
| Heating Rate | Up to 120 °C / min |
| Temperature Range | 4 °C to 450 °C |
| Pressure Control Mode | Electronic pressure control ( Supports CV and CC ) |
| Split Mode | Split/split less |
| Split Ratio | 1000:1 |
| Temperature programming | 7 stages / 8 platforms |
| Autosampler | Optional |
| Mass Spectrometry Mass Range | 1.5 to 1000 amu |
| Ion – Source Temperature | 100 °C to 350 °C |
| GC-MS Interface Temperature | 450 °C |
| Scan Rate | Up to 10000 amu/s |
| Stability | ± 0.10 amu / 48 hrs |
| Filament Emission Current | 0 to 350 µA |
| EI Source Ionization Energy | 5 eV to 250 eV |
| Resolution | Unit Resolution |
| Detector | High energy dynode electron multiplier |
| Sensitivity | Full scan ( S / N is ≥ 30 : 1 ) |
| Vacuum | Turbo molecular pump (67 L/s) |
