Sample Concentrator EZL-SC125 has precise temperature control management that is controlled by a microprocessor and the PID fuzzy technique. The nitrogen air is blown on the sample surface, which is continuously heated until evaporation occurs and the solvents are separated without the addition of oxygen. It has a temperature control range of + 5°C to 160°C, a timing range of 1 min to 99 min 59 sec and 1 block. The nitrogen Sample Concentrator can efficiently concentrate many samples at the same time without the use of a rotary evaporation instrument.
| Temperature Range | RT+ 5°C to 160°C |
|---|---|
| Temperature Accuracy (@40 ℃) | ± 0.5℃ |
| Temperature Accuracy (@120 ℃) | ±1℃ |
| Temperature Uniformity | ± 0.5℃ |
| Display Accuracy | 0.1℃ |
| Time Range | 1 to 99 h 59min/∞ |
| Heating Time | ≤ 15min(from 25℃ to 160℃) |
| Needle Length | 150mm |
| Maximum Gas Usage | 15 L/min |
| Maximum Gas Pressure | 0.05 Mpa |
| Block Quantity | 1 |
| Maximum Power | 500W |
| Voltage | AC220V or AC110V/50 to 60Hz |
| Dimension ( W x L x H ) | 260 x 220 x 450mm |
| Weight | 7.5kg |
