Bench Top pH Meter EZL-PM213 Catalog

Description

EziLab offers the Bench Top pH Meter EZL-PM213, a digital pH meter for labs that reads 0.00 to 14.00 pH at 0.01 pH readout, with 1 mV readout steps for millivolt work. Automatic or manual temperature compensation covers 0°C to 60°C, and stability holds within 0.05 pH over three hours. A large backlit LCD, menu-driven keypad, and 1.5 kg body measuring 220 by 160 by 65 mm suit compact benches. The meter recognizes 4.00, 6.86, and 9.18 pH buffers on its own and accepts one, two, or three calibration points, so routine checks take a single buffer while full-range work uses three. Auto-hold senses a stable endpoint and locks the reading, removing guesswork when electrodes settle slowly in viscous or low-ionic samples. A reset key restores factory defaults for shared benches. Water treatment plants track pH from intake through dosing and discharge, while environmental labs test surface water, groundwater, and effluent. Agricultural teams measure soil extracts and irrigation water, and industrial QC departments check process baths and rinse water. Research and teaching labs use this benchtop pH meter for buffer preparation, titration support, and calibration practice. Check which buffers your SOP names, since automatic recognition here covers 4.00, 6.86, and 9.18 and a US-style 4.01, 7.00, and 10.01 set may not be recognized, then compare meters on the Lab Equipment and Laboratory pH Meter pages.

Specifications

Level 0.05
Temperature range 0°C to 60°C
Stability (±0.05pH±1 digit)/3h
Measuring Range {
Resolution {
Basic Tolerance {
Electronic Unit Input Resistance 1012 Ω
Electronic Unit Input Current 1012 A
Power Source Digital: DC (12V, 10A)
Dimension (W×D×H) 220×160×65 mm
Net Weight 1.5 kg

Features

Feature AreaDescription
DisplayLarge backlit LCD for reading results clearly.
Temperature CompensationAutomatic or manual temperature compensation to suit the sample.
CalibrationMulti-point calibration with automatic recognition of standard buffers.
KeypadKeypad with menu-specific function keys for moving through settings.
Hold & ResetAuto-hold that locks the measurement endpoint, plus a reset back to factory settings.

Applications

  • Supports pH checks at intake, chemical dosing and discharge points in water treatment plants.
  • Handles surface water, groundwater and effluent testing in environmental labs.
  • Suited to soil extract and irrigation water monitoring in agriculture.
  • Applied to process bath and rinse water checks by industrial QC teams.
  • Employed for routine sample batches where auto-hold locks the endpoint reading.
  • Fits batch work where standard buffers are recognized automatically.