Table Top Steam Sterilizer EZL-ST61 Catalog

Description

EziLab offers the Table Top Steam Sterilizer EZL-ST61, a 20 L benchtop lab autoclave with a timer that stretches to 99 minutes for long liquid and media cycles. The microcomputer sequence draws water from the reservoir, builds 0.22 MPa at any setpoint from 105 to 134 °C with ±1 °C uniformity, circulates steam internally, then purges dry steam and vents cool air before the safety lock releases. Three plates stack inside the 250 mm diameter stainless chamber, a gasket keeps the door leak-free, the reservoir drains electrically, and a digital display reports each stage. At 40 kg on a 480 mm square base it sits on a lab bench. Pharmacy QC and QA units, R&D laboratories, chemical plants, biotechnology labs, water and air pollution laboratories and mineral water producers use this table top steam sterilizer. Typical loads include agar and broth bottles, flasks and pipette tips, sampling containers, culture plates for disposal, small reagent batches and lab coats. Choose it over the clinic model when liquid cycles need more than an hour of hold time. A 99-minute hold draws steam for a long time; ask the reservoir volume and whether one fill covers a full liquid cycle without a refill. Models with long liquid cycles are easiest to shortlist in Autoclave, and Table Top Sterilizer is where the bench ones sit.

Specifications

Chamber Volume 20 L
Sterilizing Temperature Range 105°C - 134°C
Working Temperature 134°C
Working Pressure 0.22 Mpa
Timer Range 0-99 min
Rapid Sterilization 4 – 6 minutes
Sterilizing Plates 3
Heat Average ≤ ±1°C
Sterilizing Chamber Dimension ɸ250×420 mm
Dimension (L×W×H) 480×480×380 mm
Exterior Package Dimension (L×W×H) 700×580×500 mm
Gross Weight 43 Kg
Net Weight 40 Kg

Features

Feature AreaDescription
Cycle SequenceWater fill, sterilizing, and dry-steam discharge run in order as one automatic cycle.
Steam CirculationSteam and water circulate inside the unit, and automatic purging clears steam at the end of a run.
Draining and VentingElectric reservoir draining and cool-air exhaust leave the chamber ready for the next load.
Door ClosureA quick-action closure with a safety lock keeps the door shut while the unit runs.
Chamber and DisplayA stainless steel chamber holds loads on sterilizing plates, and a digital display shows cycle status.

Applications

  • Supports agar and broth bottle processing in biotech labs.
  • Handles used culture plate decontamination.
  • Suited to flasks and sampling containers at mineral water producers.
  • Applied to small reagent batches in pharma QC/QA.
  • Employed for lab coats and pipette tips in R&D and chemical plants.