EziLab Shaking Water Bath EZL-SB161 combines controlled heating with reciprocal shaking motion for laboratory incubation and mixing applications. It operates from ambient+5C to 98C with temperature accuracy of ±0.1C at 37C for stable experimental conditions. The 30 L bath capacity supports multiple samples for efficient batch processing. Shaking speeds from 50 to 200 rpm provide consistent agitation during incubation workflows. A stainless steel chamber ensures durability and compatibility with continuous laboratory operation. The PID controller supports precise temperature regulation during extended use. Suitable for gel de-staining, cell culture incubation, pharmaceutical research, and chemical analysis applications. Explore complete Bath Circulators and advanced Shaking Water Bath for laboratory heating applications.
| Capacity | 30 Liters |
|---|---|
| Temperature range | Ambient +5°C to 98°C |
| Temperature Accuracy | ±0.1°C at 37° |
| Speed Range | 50 to 200 rpm |
| Stroke Length | 15 to 20 mm |
| Timer Range | 99 Hr 59 min |
| Temperature Sensor | PT-100Ω |
| Shaking Motion | Reciprocal |
| Standard Plate | Spring rack |
| Temperature Controller | PID controller |
| Bath Internal Material | Stainless steel |
| External Material | Steel plate with powder coating |
| Heater | Stainless steel |
| Safety Device | Over current circuit breaker |
| Motor | DC Motor |
| Power Heater Capacity | 2 KW |
| Bath Dimension (L×D×H) | 500×300×250 mm |
| External Dimension (L×D×H) | 690×340×340 mm |
Reciprocal shaking motion
PID controller for easy temperature selection
Rapid heat up and excellent stability ±0.1°C
Programmable timer up to 99 hrs 59 min - Bath stops heating when timed operation is completed
Adjustable speed control from 50 to 200 rpm
Convenient drain port with quick disconnect allows for easy cleaning of the bath
Included spring plate accepts tubes, bottles and flasks
Compact design conserves bench space
Easy to use controls allow the user to digitally select and monitor time, temperature and shaking speed
Detachable lid is included to reduce energy waste & prevent splashing of samples
Utilizes a DC power motor
Shaking speed is adjustable and electronic feedback control ensures accurately maintained speed
Requires no special fitting and use strong magnets
Low level water sensor causes a warning to flash on the display to indicate warning
It is widely used in de-staining of gels, incubation of cells or bacteria cultures, wash processes in various laboratories, research institutions, pharmaceutical industries, life science and chemical analysis.
