EziLab -86°C Ultra-Low Temperature Freezer EZL-UF157 delivers 608L storage with a -60 to -86°C temperature range for long-term laboratory cold preservation across research and biomedical environments. Two compressors deliver stable cooling performance for long storage cycles, while pull-down time is about 300 minutes with no load for routine planning. Hold-over time is 180 minutes to protect materials during outages, and a 120 mm insulation layer reduces thermal ingress during daily access. PT100 sensing manages temperature monitoring for preserved samples, with energy consumption of 13.3 kWh for facility load planning. Suited to storage and preservation of reagents, medicines, vaccines, disinfectants, and liquid chemical sterilants in R&D, biomedical, electronic, and chemical laboratories via Lab Equipment and EziLab's full range of laboratory freezers for lab workflow integration.
| Capacity | 608 L |
|---|---|
| Temperature Range | -60° to -86°C |
| Maximum Ambient Temperature | 28°C |
| Cooling Time | 300 minutes (no load) |
| Hold Over Time | 180 minutes |
| Noise | 55 dB |
| Defrost | Manual |
| Insulation | 120 mm |
| Sensor | PT 100 |
| Compressors | 2 |
| No of Shelves | 3 |
| Inner Material | 305 Stainless steel |
| Outer Material | Galvanized sheet spraying |
| Power | 1200 W |
| Energy Consumption | 13.3 KW/Hr |
| Power Supply | 220V 50 Hz |
| Interior Dimension (W×D×H) | 700×680×1255 mm |
| Exterior Dimension (W×D×H) | 940×980×1920 mm |
| Net Weight | 250 Kg |
| Gross Weight | 280 Kg |
Digital display for ease of operation
Adjustable shelves for sample holding
This freezer is used for storing all sorts of medical equipment
Independent inner door minimizing loss of cold temperature
Easy to use built-in handle design
Condenser requires no liquid cooling agent
CFC free refrigeration system
Multi-level security
Compressors are protected with constant flow of refrigerant
Rugged construction with cold rolled steel cabinets
Stainless steel interiors
Direct cooling for optimized temperature stability and uniformity
Used for storing and preservation of reagents, medicines, vaccines, disinfectant, liquid chemical Sterilants and also meets the requirements in the field of R&D, biomedical, electronic and chemical industries.
