X-ray Fluorescence Sulfur in Oil Analyzer EZL-XRF100 Catalog

Description

EziLab offers the X-ray Fluorescence Sulfur in Oil Analyzer EZL-XRF100, a total sulfur analyzer that reads 0.005 % to 99.9 % sulfur with a 10 ppm detection limit. Accuracy holds within ±10 ppm at 50 and 100 ppm, ±5 % at 1000 ppm, and ±0.5 % at 1 %. Measuring time runs from 5 to 1000 seconds or Auto, each run takes 4 to 10 mL of liquid sample, an LCD shows results, and onboard storage with USB 2.0 output keeps the data. A leakage protection system and real-time monitoring guard bench use, power draw stays under 60 W, and the body measures 400 by 320 by 220 mm. Choose it over the 5 to 50,000 ppm siblings when samples run above 5 % sulfur. Petrochemical laboratories, refineries, and fuel testing facilities need sulfur readings on site, since blending decisions wait on each result, and environmental monitoring centers verify sulfur against fuel-quality specifications without an outside laboratory. Typical uses include crude oil sulfur checks, diesel and gasoline screening, lubricant analysis, coal chemical product testing, and low ppm monitoring. Sample volume and measuring time set daily batch capacity, so compare them on the Petroleum Testing Equipment and Sulfur Content Tester pages.

Specifications

Analysis Range 0.005 % to 99.9 %
Sample Concentration Accuracy at 50 ppm Less than or equal to ±10ppm
Sample Concentration Accuracy at 100 ppm Less than or equal to ±10ppm
Sample Concentration Accuracy at 1000 ppm Less than or equal to ±5%
Sample Concentration Accuracy 1 % Less than or equal to ±0.5%
Measuring Time 5s, 10s, 15s, 30s, 60s, 100s, 150s, 200s, 300s, 600s, 1000s, Auto
Detection Limit 10 ppm
Sample Consumption 4 to 10 mL
External Output USB2.0
Power Consumption Less than 60 W
Dimensions (L× H ×D) 400 × 320 × 220mm
Packaging Dimension (L× H ×D) 530 × 480 × 450mm
Net Weight 20 Kgs
Gross Weight 14 Kgs

Features

Feature AreaDescription
PrincipleX-ray fluorescence analysis of sulfur content.
Range0.005% to 99.9% sulfur analysis range with a 10 ppm detection limit.
SampleLiquid samples of 4 to 10 mL per run.
TimingSelectable measuring time from 5 s to 1000 s, or Auto.
InterfaceLCD display with USB 2.0 external output.

Standard Accessories

  • Sample Cup×200 pieces
  • Sample Cup/Film Assembly Tools ×1 set
  • X-ray Film×1 bag
  • Power Line×1 piece

Applications

  • Applied by refineries to check sulfur in crude oil across a 0.005% to 99.9% range.
  • Employed by fuel testers for diesel and gasoline screening with test times from 5 s to 1000 s.
  • Suited to petrochemical labs for lubricant analysis using 4 to 10 mL liquid samples.
  • Supports coal chemical product testing, including samples above 5% sulfur.
  • Handles oil samples at environmental monitoring centers with an LCD display and USB 2.0 output.
  • Fits routine batches that use the Auto test time setting and 200 standard sample cups.