EziLab offers the X-ray Fluorescence Sulfur in Oil Analyzer EZL-XRF100, a total sulfur analyzer that reads 0.005 % to 99.9 % sulfur with a 10 ppm detection limit. Accuracy holds within ±10 ppm at 50 and 100 ppm, ±5 % at 1000 ppm, and ±0.5 % at 1 %. Measuring time runs from 5 to 1000 seconds or Auto, each run takes 4 to 10 mL of liquid sample, an LCD shows results, and onboard storage with USB 2.0 output keeps the data. A leakage protection system and real-time monitoring guard bench use, power draw stays under 60 W, and the body measures 400 by 320 by 220 mm. Choose it over the 5 to 50,000 ppm siblings when samples run above 5 % sulfur. Petrochemical laboratories, refineries, and fuel testing facilities need sulfur readings on site, since blending decisions wait on each result, and environmental monitoring centers verify sulfur against fuel-quality specifications without an outside laboratory. Typical uses include crude oil sulfur checks, diesel and gasoline screening, lubricant analysis, coal chemical product testing, and low ppm monitoring. Sample volume and measuring time set daily batch capacity, so compare them on the Petroleum Testing Equipment and Sulfur Content Tester pages.
| Analysis Range | 0.005 % to 99.9 % |
|---|---|
| Sample Concentration Accuracy at 50 ppm | Less than or equal to ±10ppm |
| Sample Concentration Accuracy at 100 ppm | Less than or equal to ±10ppm |
| Sample Concentration Accuracy at 1000 ppm | Less than or equal to ±5% |
| Sample Concentration Accuracy 1 % | Less than or equal to ±0.5% |
| Measuring Time | 5s, 10s, 15s, 30s, 60s, 100s, 150s, 200s, 300s, 600s, 1000s, Auto |
| Detection Limit | 10 ppm |
| Sample Consumption | 4 to 10 mL |
| External Output | USB2.0 |
| Power Consumption | Less than 60 W |
| Dimensions (L× H ×D) | 400 × 320 × 220mm |
| Packaging Dimension (L× H ×D) | 530 × 480 × 450mm |
| Net Weight | 20 Kgs |
| Gross Weight | 14 Kgs |
| Feature Area | Description |
| Principle | X-ray fluorescence analysis of sulfur content. |
| Range | 0.005% to 99.9% sulfur analysis range with a 10 ppm detection limit. |
| Sample | Liquid samples of 4 to 10 mL per run. |
| Timing | Selectable measuring time from 5 s to 1000 s, or Auto. |
| Interface | LCD display with USB 2.0 external output. |
Sample Cup×200 pieces
Sample Cup/Film Assembly Tools ×1 set
X-ray Film×1 bag
Power Line×1 piece
Ezilab’s X-ray Fluorescence Sulfur in Oil Analyser EZL-XRF100 is designed with simplicity in mind, making it easy to operate even for users with minimal experience in X-ray fluorescence. The user interface is intuitive and guides operators through the testing process step by step. It requires minimal sample preparation, which reduces the chance of errors and speeds up the analysis process. With automatic calibration and straightforward software, training time is significantly reduced. The system’s workflow suits both routine and occasional users.
The X-ray Fluorescence Sulfur in Oil Analyser EZL-XRF100 is engineered to deliver fast and reliable sulfur content analysis, helping laboratories reduce turnaround time without compromising accuracy. It supports rapid measurement cycles, making it ideal for high-throughput environments like petroleum refineries or quality control labs. The instrument's stable performance ensures consistent results across a variety of oil types. This makes it an excellent choice for labs handling large sample volumes.
Our X-ray Fluorescence Sulfur in Oil Analyser EZL-XRF100 is versatile enough to analyse sulfur content in a wide range of petroleum products, including diesel, gasoline, kerosene, and lubricating oils. It supports flexible measurement durations, which allows the user to balance speed and sensitivity based on the sample type. This adaptability ensures that different product streams can be tested using the same system without needing separate equipment. The accuracy is maintained across different matrices, making it dependable in diverse operational settings.
The X-ray Fluorescence Sulfur in Oil Analyser EZL-XRF100 is designed for long-term stability and minimal maintenance. Its sealed optical system and low-consumption X-ray source reduce wear and extend the operational life of the core components. Routine checks are easy to perform and don't require extensive downtime or service interruptions. The software includes self-diagnostic functions that alert users to potential issues before they become serious. These features help laboratories maintain continuous operation with less unplanned maintenance. As a result, productivity remains high in the demanding work environments.
Ezilab’s X-ray Fluorescence Sulfur in Oil Analyser EZL-XRF100 includes built-in data storage, allowing users to store results securely without the need for constant manual logging. It can export data in standard formats, which makes it easy to share or archive results for audits, reports, or compliance documentation. The software interface allows users to review past results and generate trend reports directly from the system. This improves traceability and simplifies quality assurance processes. The device integrates smoothly into digital lab environments, enhancing data efficiency and accuracy.
Our X-ray Fluorescence Sulfur in Oil Analyser EZL-XRF100 is built to help labs meet regulatory standards for sulfur content in fuels, such as those outlined by ASTM and ISO. Its detection capabilities support low-sulfur fuel testing, which is essential for compliance with environmental regulations. The instrument’s performance ensures reliable results that can be used for certification or regulatory reporting. It is especially valuable in refineries, petrochemical plants, and inspection agencies that need to meet strict testing protocols. The system supports both quality control and regulatory assurance with confidence.