EziLab offers the Analytical HPLC System EZL-AHS52, a modular liquid chromatograph built for high-pressure separation with UV-Visible detection and optional fluorescence, refractive index, and electrochemical detectors. The pump reaches up to 75 MPa with a flow range of 0.0000 to 12.0000 mL/min in 0.0001 mL/min steps, holding ±0.20% flow accuracy, ≤0.075% RSD flow stability, and ≤0.75% gradient error. A 108-position autosampler (2 × 54 vials, 2 mL) also accepts 96-well plates, delivering ≤0.3% RSD injection repeatability, ≤0.002% cross contamination, and optional cooling from 4 to 40°C. The column oven controls temperature from 4 to 90°C with ±0.03°C/h stability, and the system ships with a column oven, three columns, and a solvent organiser. Flow-to-needle injection, optimized needle cleaning, and automated injection control support unattended batch runs across full shifts, freeing analysts for other tasks. In industrial settings, pharmaceutical laboratories use this HPLC machine for compound separation, impurity profiling, and method validation, while biotechnology and chemical companies run routine purity testing and component identification. Food safety centers and environmental monitoring agencies detect trace compounds in complex sample mixtures, and academic institutions rely on it for quantitative and qualitative research. Overnight batches are where a 108-position autosampler pays off, and the Chromatograph category and Liquid Chromatograph range show how queue length compares across models.



Quantity:
$55396
Flow Rate Setting Range 0.0000 to 12.0000mL/min
Flow Rate Setting Increment 0.0001mL/min
Gradient Error Less than equal to 0.75%
Gradient Stability 0.2% RSD (5% to 95%, 0.2 to 2.0mL/min)
Flow Rate Setting Value Error ± 0.20%
Flow Rate Stability Less than equal to 0.075% RSD
Maximum Operating Pressure 62MPa /75MPa
Autosampler Linearity R ≥ 0.9999 (1.0μL to 50μL)
Autosampler Cross Contamination Less than equal to 0.002%
Number Of Injection Bits 108 bits (2 ×54, 2mLsample bottle)
Injection Mode flow to needle
Injection Volume 100μL, 200μL, 500μL, 1000μL, 1500μL, 2000 μL
Repeatability Less than 0.3 % RSD (2μL to Max)
Less than 1.0 % RSD (0.1μL to 1.9μL)
Linear Correlation Coefficient Greater than 0.9999
Number of Sample Position 108 (2×54, 2mL), 96-well plates
Temperature Setting Range 4 to 40 ℃ (optional refrigeration)
Temperature Setting Value Error ±0.5℃ (optional refrigeration)
Temperature Stability ±0.5℃ (optional refrigeration)
Column Oven Temperature Range 4℃ to 90℃
Column Oven Temperature Stability ± 0.03℃/h
Column Oven Temperature Setting Value Error ± 0.1℃
Autosampler Dimension 930 × 520 × 570 mm
Column Oven Dimension 690 × 520 × 550 mm
Pump & Detector Dimension 830 × 520 × 430 mm
Fluorescence Detector Dimension 640 × 480 × 400 mm
Refractive Index Detector Dimension 640 × 470 × 400 mm
Electrochemical Detector Dimension 610 × 520 × 370 mm
Autosampler Weight 51 Kg
Column Oven Weight 32 Kg
Pump & Detector Weight 32.2 Kg
Fluorescence Detector Weight 37.5Kg
Refractive Index Detector Weight 29.5 Kg
Electrochemical Detector Weight 28.5 Kg
Total Weight 232 Kg
Feature AreaDescription
Pump and FlowFlow setting from 0.0001 to 12 mL/min in 0.0001 mL/min steps.
Autosampler108 vial positions in 2 × 54 trays plus 96-well plates, with flow-to-needle injection.
Sample CoolingOptional refrigeration for the sample tray from 4 to 40 °C.
Column OvenOven range of 4 to 90 °C with 3 columns in the standard set.
Detector OptionsOptional FLD, RID and ECD detectors in a modular layout.

Accessories 

Quantity 

Unit 

Column Oven

1

Set 

Columns

3

Pcs

Solvent Organiser

1

Piece

Accessories

Quantity

Unit

FLD3400 Detector Flow cell assembly

Piece1

FLD3400 Detector Xenon lamp

Piece 1

RID3400 Detector Flow cell assembly

Piece1

ECD3100 Detector

Piece1

Pump High pressure sealing ring

Pieces2

Pump Main pump inlet valve assembly

Pieces2

Pump Auxiliary pump inlet valve assembly

Pieces2

Autosampler High pressure sealing ring

Piece1

Autosampler Low pressure sealing ring

Piece 1

Autosampler Injection needle assembly

Pack1

Accessories Aqueous phase needle filter

Pack1

Accessories Organic phase needle filter

Pack1

Accessories Sample bottle, cap

pieces2

Accessories Filter sieve plate

Piece1

Accessories 1/16 PEEK hand tight fittings

Pieces8

Accessories PEEK pipe

meters2

Accessories PTFE pipe-ID0.25

meters 2

Accessories PTFE pipe-ID0.75

meter1
  • Applied by pharmaceutical labs for compound separation and impurity profiling at pressures up to 75 MPa.
  • Employed by biotech companies for purity testing and component identification on a 108-position autosampler.
  • Suited to chemical companies for process sample analysis with flow from 0.0001 to 12 mL/min.
  • Supports food safety labs in trace compound detection in complex mixtures using optional FLD, RID or ECD detectors.
  • Handles environmental agency screening with a column oven set from 4 to 90 °C.
  • Fits batch runs on 96-well plates with optional sample cooling from 4 to 40 °C.