EziLab offers the High Speed Mini Centrifuge EZL-HSC111, a microcentrifuge that reaches 16,000 rpm and 17,602 × g in a 260 × 240 × 145 mm footprint. Choose it over a quick-spin mini centrifuge when protocols call for true pelleting force, and over a full benchtop model when only microtubes need spinning. The standard angle rotor holds 12 × 1.5 or 2 mL tubes, giving enough force to pellet DNA, RNA, and protein precipitates or clear cell debris from lysates. Speed holds within ±30 rpm for repeatable runs, and quick acceleration and deceleration shorten each cycle. The timer covers 1 to 99 minutes 59 seconds for short pulses and longer separations. A user-friendly LCD shows speed and time at a glance, and operation stays at or below 60 dB, quiet enough to run beside a PCR workstation. At 4.5 kg and 100 W, it moves between benches and shared lab bays. Molecular biology labs use it for nucleic acid extraction and PCR sample prep, protein groups pellet precipitates, cell biology teams collect cells and run microfiltration spin columns, and clinical laboratories separate small-volume samples. Microtube-only workflows suit this rotor, while tubes larger than 2 mL need a different centrifuge, a boundary visible across the Laboratory Centrifuge category and High Speed Mini Centrifuge range.
| Maximum Speed | 16000 r/min |
|---|---|
| Maximum RCF | 17602 × g |
| Maximum Capacity | 12 × 1.5/2 mL |
| Speed Accuracy | ± 30 r/min |
| Time Setting Range | 1 min to 99 min, 59 sec |
| Noise | ≤ 60 dB |
| Power Consumption | 100 W |
| Dimension | 260 × 240 × 145mm |
| Packaging Dimension | 320 × 350 × 190mm |
| Net Weight | 4.5 Kg |
| Gross Weight | 7 Kg |
Low-noise Operation
User friendly interface
LCD control display
Quick in acceleration and deacceleration
Stable speed control
| • | Used in molecular biology labs for nucleic acid extraction and PCR sample prep. |
| • | Applied by protein groups to pellet precipitates. |
| • | Employed by cell biology teams to collect cells and run microfiltration spin columns. |
| • | Suited to clinical laboratories separating small-volume samples. |
| • | Used for quick spin-downs of microtubes and PCR tubes in clinical diagnostics workflows. |
| • | Supports pelleting of DNA, RNA and protein precipitates or clearing cell debris from lysates beside a PCR workstation. |
| Rotor Type | Capacity (ml) | Maximum Speed (r/min) | Maximum RCF (×g) |
| Standard Angle Rotor | 12 × 1.5/2ml | 16000 r/min | 17602× g |
The High Speed Mini Centrifuge EZL-HSC111 is commonly used for quick spin-downs of microtubes, PCR tubes, and other small-volume samples. The compact design makes it ideal for molecular biology, clinical diagnostics, and routine laboratory workflows where rapid separations are needed. Its ability to deliver consistent high speeds ensures precise sedimentation of particles. Researchers benefit from both time efficiency and reliable results in routine sample preparation.
Ezilab’s High Speed Mini Centrifuge EZL-HSC111 is designed with simplicity in mind, making it accessible for both beginners and experienced staff. Its one-touch operation allows users to start or stop the centrifuge quickly, minimizing training requirements and reducing handling errors. The digital or manual control options makes speed selection straightforward and reliable. Safety features such as automatic lid locking provide added peace of mind, especially in busy laboratory environments. This user-friendly approach helps increase efficiency and reduces downtime during routine laboratory tasks.
Ezilab’s High Speed Mini Centrifuge EZL-HSC111 incorporates multiple safety features to ensure operator protection. An automatic lid lock prevents the lid from being opened while the rotor is spinning, significantly reducing the risk of accidents. The imbalance detection system halts operation if tubes are not properly balanced, preventing damage to both samples and the device. Additionally, a quick-stop function immediately ceases rotor movement once the lid is lifted. These safety measures make it a trusted choice for laboratories where multiple users may handle the equipment daily.
Our High Speed Mini Centrifuge EZL-HSC111 is built with a durable motor and rotor system designed to withstand frequent use at maximum speeds. Its robust engineering ensures stability, even during extended or repeated centrifugation cycles. With proper maintenance, such as cleaning the rotor chamber and balancing tubes, the device maintains consistent performance for years. This reliability makes it especially suitable for labs that depend on continuous, accurate separations in high-throughput settings.
The High Speed Mini Centrifuge EZL-HSC111 is designed with low-maintenance operation in mind, making it a practical choice for busy laboratories. Regular care involves cleaning the rotor chamber, ensuring that samples are properly balanced, and periodically checking for wear on the rotor. Because of its straightforward construction, it does not require frequent servicing or complicated upkeep. Following these simple practices helps extend the lifespan of the centrifuge while ensuring accurate results. For laboratories, this ease of maintenance reduces downtime and minimizes the cost of ownership.
Our High Speed Mini Centrifuge EZL-HSC111 accelerates separation processes, delivering rapid results in just a few minutes. Its high rotation speed reduces waiting times, which is especially beneficial in high-throughput labs or classrooms with limited time for experiments. By minimizing preparation and spin times, staff can focus more on data analysis and experimental follow-up. This efficiency not only speeds up workflows but also improves overall laboratory productivity. For fast-paced lab environments, it proves to be a reliable time-saving asset.
