EziLab offers the Low Speed Centrifuge EZL-LSC103, a hospital benchtop centrifuge that carries four 250 mL swing-out buckets to 5000 rpm and 4675 g while holding speed within ±10 rpm. A brushless DC motor under microprocessor control ramps smoothly to cut vibration and runs without carbon brushes to replace, bracket sets adapt the buckets to common tube sizes, the timer spans 1 second to 99 hours 59 minutes 59 seconds, and noise stays at or below 62 dB(A). The whole unit draws 550 W, measures 430 by 540 by 355 mm, and weighs 45 kg. Choose it over the 5300 rpm sibling with the same rotor format when shear-sensitive cell suspensions call for a gentler spin, and over tube-only models when 250 mL bottles are the daily format. Hospital laboratories separate serum and plasma on it, research institutes pellet cultured cells without damage, pharmaceutical units clarify suspensions, and blood banks prepare components from donor units. Daily runs include serum separation for chemistry analyzers, cell washing, platelet-rich plasma preparation, and clearing turbid samples before analysis. Laboratory Centrifuge and Low Speed Centrifuge also list the 5300 rpm sibling; ask which tube brackets ship with this unit.
| Maximum Speed | 5000 rpm |
|---|---|
| Maximum RCF | 4675×g |
| Maximum Capacity | 4 × 250 ml |
| Timer Range | 1s to 99h 59min 59s |
| Revolutions/min | ±10 r/min |
| Noise Level | ≤62 dB(A) |
| Power Consumption | 550 W |
| Dimensions (L × W × H) | 430 × 540× 355 (mm) |
| Weight | 45 kg |
| Feature Area | Description |
|---|---|
| Motor | Brushless DC motor with no carbon brushes. |
| Control | Microprocessor control of speed and run time. |
| Buckets | Swing-out buckets for large bottles, with bracket sets for common tube sizes. |
| Vibration | Motor action that reduces vibration during spins. |
| Format | Benchtop format for hospital labs. |
| Rotor Type | Capacity ( ml ) | Maximum Speed (r/min) | Maximum RCF (×g) |
| Swing-out rotor | 4x250ml | 5500rpm | 4675×g |