EziLab offers the Dry Bath Incubator EZL-DBI105, a high temp dry block heater for lab use that runs from 5 °C above room temperature to 160 °C and gets there in 15 minutes. Accuracy holds ±0.5 °C at 40 °C and ±1 °C at 120 °C, uniformity stays within ±0.5 °C, the display reads to 0.1 °C, the timer spans 1 minute to 99 hours 59 minutes, and over-temperature cutoff plus alarms protect the sample. One block seats at a time, chosen from fifteen formats covering 6 to 40 mm tubes and 0.2, 1.5 and 2.0 mL microtubes, and the 260 by 220 by 100 mm body weighs 5 kg and draws 300 W. Choose it over the four-block 130 °C sibling when one sample format needs heat the standard units cannot reach. Microbiology labs heat-fix and lyse cultures on it, molecular biology groups denature templates and inactivate enzymes, pharmaceutical QC departments run high-temperature stability holds, and petrochemical labs warm viscous samples before testing. Routine tasks include heat inactivation, sample digestion, melting agar, and drying residues. Laboratory Incubator and Dry Bath Incubator hold the lower-temperature blocks; most polypropylene tubes top out near 121 °C, a limit to check before running hotter.



Quantity:
$1328
Temperature Range Room Temperature + 5℃ to 160℃
Temperature Accuracy ± 0.5℃ (at 40℃) or ± 1℃ (at 120℃)
Temperature Uniformity ± 0.5℃
Display Accuracy 0.1℃
Timing Range 1 minute to 99 hours 59 minutes
Heating Time ≤ 15 minutes (from 25℃ to 160℃)
Block Quantity 1
Power Consumption 300 W
Dimensions 260 × 220 × 100 mm
Weight 5.0 Kg
Feature AreaDescription
HeatingHigh-temperature dry block heating for lab use.
BlocksInterchangeable optional blocks for tubes and microtubes of many sizes.
TimerBuilt-in timer for timed heating runs.
ProtectionOver-temperature protection with safety alarms.
ControlControl panel for setting temperature and time.
  • 6 mm × 48 Test tubes Block × 1 Piece 7 mm × 48 Test tubes Block × 1 Piece 10 mm × 24 Test tubes Block × 1 Piece 12 mm × 24 Test tubes Block × 1 Piece 13 mm × 24 Test tubes Block × 1 Piece 15 mm × 16 Test tubes Block × 1 Piece 16 mm × 16 Test tubes Block × 1 Piece 19 mm × 12 Test tubes Block × 1 Piece 20 mm × 12 Test tubes Block × 1 Piece 26 mm × 8 Test tubes Block × 1 Piece 28 mm × 4 Test tubes Block × 1 Piece 40 mm × 3 Test tubes Block × 1 Piece 0.2 ml × 48 Centrifuge Tubes Block × 1 Piece 1.5 ml × 24 Centrifuge Tubes Block × 1 Piece 2.0 ml × 24 Centrifuge Tubes Block × 1 Piece

  • Supports heat-fixing and lysing of cultures in microbiology labs.
  • Handles template denaturing and enzyme inactivation in molecular biology labs.
  • Suited to sample digestion, residue drying and high-temperature holds in pharmaceutical QC.
  • Applied to warming viscous samples before testing in petrochemical labs.
  • Employed for agar melting and heat inactivation in routine lab tasks.