EziLab offers the Dry Bath Incubator EZL-DBI110, a dry block heater that controls temperature from room temperature +5°C to 100°C with ≤±0.3°C uniformity at 37°C and 0.1°C display resolution. A heated lid set up to +10°C above the block stops condensation from forming on tube caps. The block heats from 25°C to 100°C in 12 minutes or less, and the timer runs from 1 second to 99 minutes 59 seconds. Multi-point programs hold up to 5 temperature steps and repeat up to 99 cycles. Five blocks come standard, covering 2.0 ml × 35, 1.5 ml × 35, 0.5 ml × 54, 0.2 ml × 96 PCR tubes, and 96-well ELISA plates, and the unit recognizes each block automatically. The 4 kg, 300 × 200 × 210 mm body draws 150 W. As a heating block, it replaces water baths for incubation, DNA denaturation, enzyme digestion, and sample preheating without contamination from water. Microbiology labs incubate cultures and run enzyme reactions, while molecular biology labs denature DNA, inactivate enzymes, and prepare PCR samples. Clinical, food, and pharmaceutical testing labs use it for routine incubation in quality control workflows. See the Dry Bath Incubators and Dry Bath Incubator pages for full specifications.
| Temperature Setting Range | 0℃ to 100℃ |
|---|---|
| Temperature Control Range | Room temperature + 5℃ to 100℃ |
| Temperature Accuracy | ≤ ± 0.3℃ at 37℃ |
| Temperature Uniformity | ≤ ± 0.3℃ at 37℃ |
| Display Accuracy | 0.1℃ |
| Heating Lid Temperature Setting Range | OFF to + 10℃ |
| Heating Lid Temperature Accuracy | ≤ ± 0.5℃ |
| Timing Range | 1 second to 99 minutes 59 seconds |
| Heating Time | ≤ 12 minutes (from 25℃ to 100℃) |
| Heating Lid Heating Time | ≤ 10 minutes (from 25℃ to 100℃) |
| Multi Points Running | Yes (maximum 5 points) |
| Multi Cycle | Yes (maximum 99 times) |
| Fuse | 250 V 3A ⌀ 5 × 20 |
| Power Consumption | 150 W |
| Dimensions | 300 × 200 × 210 mm |
| Weight | 4.0 Kg |
Built-in Temperature Sensor
LCD Display
Auto recognition of Blocks
Durable Construction
Built-in Flexible Timer
2.0 ml × 35 Centrifuge Tubes Block × 1 Piece 1.5 ml × 35 Centrifuge Tubes Block × 1 Piece 0.5 ml × 54 Centrifuge Tubes Block × 1 Piece 0.2 ml × 96 PCR Centrifuge Tubes Block × 1 Piece 0.2 ml × 96 ELISA Plate Tubes Block × 1 Piece
| • | Microbiology labs incubating samples and cultures in 1.5 and 2.0 ml tubes, with temperature held at ±0.3 °C at 37 °C. |
| • | Molecular biology labs running DNA denaturation and PCR sample preparation in the 96-place 0.2 ml block, with the adjustable heated lid preventing condensation on tube caps. |
| • | Enzyme reactions and enzyme inactivation steps, using the multi-point program of up to 5 steps and 99 cycles. |
| • | Clinical labs warming samples in the 96-well ELISA plate block, with the unit recognizing each block automatically when it is swapped. |
| • | Food and pharmaceutical quality control labs replacing water baths, with no water to contaminate samples and the block heating from 25 °C to 100 °C in 12 minutes or less. |
