EziLab supplies the Dry Bath Incubator EZL-DBI111 for molecular biology and clinical laboratories that need a sub-ambient cooling capability positioned between the RT-20°C multi-cycle unit and the RT-30°C deep-cold model in this catalog. Spanning RT-25°C to 100°C, this cooling mode lab incubator supports advanced protocols requiring below-ambient temperature steps without reaching the deepest -30°C floor reserved for the most extreme cold-incubation needs. That RT-25°C threshold gives molecular biology labs meaningful sub-ambient capability for cold enzymatic reactions, sample preservation during processing, or cold-shock treatments that fall between the more limited RT-20°C multi-cycle unit's range and the deepest cooling the RT-30°C model provides. Advanced protocols benefiting from cooling mode operation — where a workflow specifically calls for a cooling phase as part of a broader temperature sequence — get that capability at this intermediate cold-range point without needing the most extreme cooling depth available in this catalog. Molecular biology and clinical labs running protocols requiring meaningful but not maximum sub-ambient temperature control get an appropriately positioned instrument here between the other two cold-capable dry bath models. See the Cooling Mode Lab Incubator and Dry Bath Incubator ranges for intermediate sub-ambient incubation needs across USA molecular biology and clinical laboratory settings.
| Temperature Setting Range | -10℃ to 100℃ |
|---|---|
| Temperature Control Range | Room temperature - 25℃ to 100℃ |
| Temperature Accuracy | ≤ ± 0.3℃ at 37℃ |
| Temperature Uniformity | ≤ ± 0.3℃ at 37℃ |
| Display Accuracy | 0.1℃ |
| Heating Lid Temperature Setting Range | OFF to + 10℃ |
| Heating Lid Temperature Accuracy | ≤ ± 0.5℃ |
| Timing Range | 1 second to 99 minutes 59 seconds |
| Heating Time | ≤ 12 minutes (from 25℃ to 100℃) |
| Heating Lid Heating Time | ≤ 10 minutes (from 25℃ to 100℃) |
| Cooling Time 1 | ≤ 12 minutes (from 100℃ to 25℃) |
| Cooling Time 2 | ≤ 25 minutes (from Room temperature to Room temperature - 30℃) |
| Storage at 4℃ | Yes |
| Multi Points Running | Yes (maximum 5 points) |
| Multi Cycle | Yes (maximum 99 times) |
| Fuse | 250 V 3A ⌀ 5 × 20 |
| Power Consumption | 150 W |
| Dimensions | 300 × 200 × 210 mm |
| Weight | 4.7 Kg |
Adjustable Heating Lid
Temperature Sensor
Auto-identification of Blocks
High-Resolution LCD Screen
Multi-point Operation Mode
2.0 ml × 35 Centrifuge Tubes Block × 1 Piece 1.5 ml × 35 Centrifuge Tubes Block × 1 Piece 0.5 ml × 54 Centrifuge Tubes Block × 1 Piece 0.2 ml × 96 PCR Centrifuge Tubes Block × 1 Piece 0.2 ml × 96 ELISA Plate Tubes Block × 1 Piece
Dry Bath Incubator EZL-DBI111 is used in biotechnological and molecular biological research laboratories and industries for sample storage and incubation.
