EziLab Bench Top Conductivity Meter EZL-CM112 delivers enhanced conductivity measurement across broad laboratory ranges for routine conductivity meter workflows in analytical and industrial environments. Temperature measurement extends up to 60°C with stable operation in ambient conditions up to 40°C. Instrument variation of 1.5% FS supports consistent analytical workflows throughout the measurement range. Compact housing allows convenient bench placement for continuous use. AC-powered operation supports consistent performance during prolonged testing sessions. Suited to water quality analysis, solvent monitoring, and temperature coefficient determination in laboratory and industrial settings via Lab Equipment and EziLab's full range of conductivity meters for lab workflow integration.
| Measuring range |
0.00 to 19.99 µS/cm 20.0 to 199.9 µS/cm, 200 to 1999 µS/cm 2.00 to 19.99 mS/cm, 20.0 to 199.9 mS/cm |
|---|---|
| TDS | 0 to100 g/L |
| Salinity | 0 to100 gppt |
| Resistivity | 0 to 100 MΩ.cm |
| Resolution | 0.01/0.1/1 µS/cm 0.01/0.1 mS/cm |
| Accuracy |
Electrode: ± 1.0 % FS Instrument: ± 1.5 % FS |
| Temperature Compensation | 0 °C to 100 °C (Automatic) |
| Electrode Constants | 0.1/1/10 cm-1 |
| Reference Temperature | 25 °C, 20 °C, 18 °C |
| Environment Temperature | 5 °C to 35 °C |
| Environment Humidity | ≤ 85 % |
| Power | 2 AA batteries (1.5 V) |
| Dimensions (W×D×H) | 160×90×30 mm |
| Packing Dimensions (W×D×H) | 480×300×60 mm |
| Weight | 360 g |
Large LCD screen with white backlight
Microprocessor chip with auto-temperature compensation, data storage, auto power off, self-diagnosis, low voltage displays and function setup
Auto-recognition of 8 conductivity solutions
2 series of standard buffers are available
1point calibration of conductivity electrode, meet the accuracy for test 0.5 µS/cm to 200 mS/cm
Can switch between conductivity, TDS, salinity and resistivity
Multinomial calculation for TDS and salinity
Conductivity mode has the non-linear temperature compensation function for high purity water
Racks and skid-proof shells are provided
Data Storage is of 200 sets
IP grade is IP57
Plastic conductivity electrode with auto-temperature compensation is provided to give fast and accurate results
These meters have sensors that detect various parameters for water-based measurements, making them ideal for water treatment, medical, beverage, laboratory, and other industrial settings. Small instruments that allows us to work in a lab or on-site in difficult conditions and serve as dependable, high-quality, and convenient inspection and testing tools.
Conductivity meter LO-CCM400 Series 1 unit
Conductivity electrode 1 pc
Temperature electrode 1 pc
Backup AA battery 2 pcs
Operation manual 1 copy
