EziLab offers the Ash Content Tester EZL-ACT100, a separated ashing furnace system with a 1000°C muffle furnace, a 400°C hot plate, and a digital control unit. Resistance wire heating brings the 300 by 200 by 120 mm firebrick chamber to 775°C within 50 minutes, while the 180 mm hot plate steps through five heat grades for pre-burning samples. A cold-rolled steel shell, thermocouple, and digital display complete the 4000 W furnace. Each ash content test starts by charring the sample on the hot plate, then burning off all organic matter in the muffle furnace until only inorganic residue remains for weighing. Twenty porcelain crucibles, ten of 50 ml and ten of 100 ml, plus crucible tongs ship with the kit, so analysts can run parallel ash determination on fuels, lubricants, feeds, and food samples. Petroleum refiners check fuel oils and lubricants for inorganic contaminants and additive levels, while food processors and agricultural labs measure mineral content in grains, feeds, and finished products. Pharmaceutical teams test residue on ignition of raw materials, and materials science groups characterize fillers. As ash testing equipment, the separated layout fits benches easily. See the Ash Content Testers and Ash Content Tester pages for full specifications.



Quantity:
$2054
Maximum Temperature 1000℃
Temperature Rising Speed (To 775±25℃) ≤ 50min
Heating Element Electric resistance wire
Product Outline Separated design
Chamber Material Firebrick
Maximum Temperature of Hot Plate 400°C
Temperature Control of Hot Plate Five grades
Diameter of Hot Plate Φ180mm
Power Consumption Hot Plate 2000W
Dimension of Hot Plate 360 × 360 × 200 cm
Weight of Hotplate 5kg
Dimension of Control Unit 360 × 360 × 20cm
Weight of Control Unit 5kg
Power Consumption of The Muffle Furnace 4000W
Working Chamber Dimension 300 × 200 × 120 mm
Dimension of Muffle Furnace 750 × 530 × 580 mm
Weight of Muffle Furnace 80kg
Total Weight 90kg
Feature AreaDescription
Muffle FurnaceReaches 1000 °C from a 4000 W electric resistance wire element.
Furnace ChamberFirebrick working chamber measuring 300 × 200 × 120 mm.
Hot PlateΦ180 mm plate rising to 400 °C with five heat grades.
Layout and ControlSeparate furnace, hot plate and control unit with digital temperature control and display.
AccessoriesThermocouple, ten 50 ml and ten 100 ml porcelain crucibles, and crucible tongs.
  • Muffle furnace × 1 set Temperature controller × 1 set Thermocouple × 1 set Compensation lead wire × 1 pc Porcelain crucible (50ml) × 10 pcs Porcelain crucible (100ml) × 10 pcs Crucible tongs × 1 pc

  • Applied by petroleum refineries for ash checks on fuel oils and lubricants in a 300 × 200 × 120 mm chamber.
  • Employed by food processors for mineral content in finished products with heating up to 1000 °C.
  • Suited to agricultural labs for grain and feed mineral tests with a 775 °C target reached in up to 50 min.
  • Supports materials science groups working on fillers with a firebrick chamber and resistance wire heating.
  • Handles pre-burning of organic matter on a 180 mm hot plate with 5 heat grades up to 400 °C.
  • Fits batch ashing with 10 × 50 ml and 10 × 100 ml porcelain crucibles in the accessory set.