EziLab offers the High Speed Refrigerated Centrifuge EZL-HRC107, a floor standing lab centrifuge that spins to 22,000 rpm and 52,020 g RCF while refrigeration holds the chamber from -20 to 40 °C within ±2 °C. Rotors take up to six 500 mL bottles, speed holds to ±10 rpm, and run times program from one second to 99 hours 59 minutes. An automated door opens and closes, imbalance protection shuts the drive down on an uneven load, over-speed and over-temperature limits guard samples, and automatic rotor identification sets the correct ceiling. One hundred programs store methods, and the 342 kg frame draws 5,000 W at 65 dB(A). Molecular biology laboratories, clinical research units, pharmaceutical process groups, biotechnology companies, hospital core facilities and university life science departments use this high speed refrigerated centrifuge for mid-volume cold separations. Typical runs include cell harvesting from culture, plasmid and genomic DNA pelleting, RNA isolation, protein precipitation, membrane fraction preparation and serum separation. Choose it over the 1,000 mL sibling when half-liter bottles at higher g are the daily need. Delivery comes first: a 342 kg crate must clear doorways and lifts, and its crated dimensions are worth requesting early. Rotor volumes for similar floor models turn up once you go from Laboratory Centrifuge into High Speed Refrigerated Centrifuge.
| Maximum Speed | 22000 rpm |
|---|---|
| Maximum RCF | 52020 × g |
| Maximum Capacity | 6 × 500 ml |
| Timer Range | 1min to 99h59min ; 1s to 99min59s and 1s to 99min59s |
| Speed Accuracy | ±10 rpm |
| Temperature Range | -20°C to 40°C |
| Temperature Accuracy | ±2°C |
| Noise Level | 65dB (A) |
| Power Consumption | 5000 W |
| Dimension (L × W × H) | 935 × 700 × 940 mm |
| Weight | 342 kg |
Imbalance protection
Stores 100 user-defined programs
Automated door opening and closing
Over speed and over temperature protection
Built in automatic rotor identification system
| • | Harvests cells from culture bottles for biotech companies, loading up to 6 × 500 mL per run at speeds reaching 22,000 rpm. |
| • | Pellets plasmid and genomic DNA and isolates RNA for molecular biology labs, with the chamber cooled as low as -20 °C to protect the sample. |
| • | Precipitates proteins and prepares membrane fractions for pharmaceutical process groups, using forces up to 52,020 × g. |
| • | Separates serum for hospital core facilities and clinical research units, with the automated door opening and closing at the end of each run. |
| • | Serves shared life science department benches with 100 stored programs, automatic rotor identification, and imbalance, over-speed and over-temperature protection. |
