Low Temperature Kinematic Viscometer EZL-KV200 offers a temperature range from -65°C to room temperature with an accuracy of ±0.1°C. It has a controller that is used to regulate the temperature of the constant temperature bath. Our Viscometer balances the refrigeration and heating components to achieve thermal equilibrium.

Temperature Range ‘-65℃ to RT
Temperature Control Accuracy ±0.1 ℃
Ambient Temperature 15℃ to 35℃
Temperature Sensor RTD, Pt100
Relative Humidity ≤ 85%
Heating Device Electric heater
Heating Device Power ≤ 600 W
Refrigeration Unit Double refrigeration compressors
Constant Temperature Bath Stainless steel
Capillary Viscometer Tubes (Pinkevitch Viscometer) 6 pieces
The Diameters for Each Piece 0.6, 0.8, 1.0, 1.2, 1.5, 2.0 mm
Power Supply AC (220 ± 10%) V 50Hz
Maximum Power Consumption 1700 W
Dimensions 530mm × 460mm × 870mm
  • It can accommodate dual samples
  • Uniform temperature ensured by stirring motor
  • Bath LEDs improve viscometer clarity for convenient readings
  • Dual compressors optimize cooling in the unit
  • Constant temperature bath is made of stainless steel
  • Main Unit × 1
  • Capillary Viscometer (Total 6 Pieces) × 1
  • Thermometer (-80 to 20℃, Each Graduation 0.5℃) × 1
  • Bath Cover × 1
  • Capillary Clamps × 2
  • Plastic Pump × 1
  • Stopping Ring for Thermometer (1#) × 2
  • Ear Washing Bulb × 1
  • Our Low Temperature Kinematic Viscometer is appropriate for measuring the kinematic viscosity of liquid petroleum products, specifically Newtonian liquids, under consistent low temperatures.